P1524 Dodge Ram 1500 Error Code Solutions
The P1524 error code in Dodge Rams signals that your engine oil pressure isn’t right. It affects how the valves in your engine work. If not fixed, your Dodge Ram 1500 won’t perform well.
Knowing about this code helps you keep your engine running great and prevents bigger issues later. This guide covers symptoms like poor engine efficiency and issues with the MDS (Multiple Displacement System).
We’ll go over why this happens, such as bad oil pressure sensors or clogged oil filters. Also, we’ll show you how to figure out what’s wrong step by step.
You’ll learn how to get your oil pressure back to where it should be. This includes changing out important parts like the oil filter and checking wires for damage.
Going for top-notch parts, like Mopar oil filters, makes your truck more reliable and run better. With the advice we give, you can fix the P1524 error confidently.
This means your Dodge Ram 1500 will keep running well for a long time. Ready to get into the nitty-gritty? Let’s start!
What is The P1524 Error Code?
The P1524 error code is about an oil pressure problem. It’s known as “Oil Pressure Out of Range.” This error is vital for the P1524 Dodge Ram 1500’s engine, especially for the camshaft’s movement.
If the oil pressure is too low, the engine’s Variable Valve Timing (VVT) system can’t work right.
When oil pressure drops, the Dodge Ram 1500’s Multi-Displacement System (MDS) might stop working. The MDS needs oil pressure above 41 PSI.
The P1524 error pops up if oil pressure goes below 36 PSI. This can happen for many reasons, and it’s important to fix them quickly.
- Engine oil level low: Check and refill the engine oil.
- Engine oil aerated or contaminated: Replace engine oil and oil filter.
- Incorrect engine oil filter: Ensure the engine oil filter is the correct type.
- Insufficient oil pressure due to mechanical failure: Inspect and repair the oiling system.
- Faulty engine oil pressure sensor: Replace the faulty sensor.
- Powertrain Control Module (PCM) issue: A defective PCM may require replacement.
Several factors can affect a P1524 Dodge Ram 1500. To solve the P1524 error, a detailed check-up is needed to find and fix the main issue.
What’s The Symptoms of P1524 Dodge Ram 1500?
Knowing the signs of P1524 Dodge Ram 1500 early is key to prevent bigger issues. The check engine light turning on is a big clue. This happens for many reasons but mainly due to low oil pressure.
If your oil pressure gauge goes down, there’s likely a problem. Sometimes using a high-efficiency oil filter can increase pressure a lot, up to 20 PSI.
But, be careful as these filters may slow down the oil flow, causing more issues. Watch out for oil pressure that changes, especially when you slow down or speed up.
If pressure goes under 36 PSI, that’s bad news. You might also find your engine stalling when you try to speed up, which means the valve timing system isn’t working right.
Also, check your oil level. If low, adding 3-4 quarts might fix it. Then, if you drive 40-50 miles, the engine light might turn off, meaning the problem is solved.
| Symptoms | Details |
|---|---|
| Check Engine Light | Illuminates due to low oil pressure. |
| Oil Pressure Gauge | Visual loss of oil pressure readings. |
| Oil Filter Change | Increases oil pressure by 20 PSI after switching to a WIX filter. |
| Oil Level | Requires adding 3-4 quarts to reach proper levels. |
| Engine Performance | Stalling or decreased power during acceleration. |
Catching these signs early really helps fix your Dodge Ram 1500 faster. Knowing what to look for means you can start fixing it sooner.
Common Causes of P1524 Dodge Ram 1500
The P1524 Dodge Ram 1500 causes can include various things, all leading to Dodge Ram 1500 oil pressure issues. Knowing what causes them helps fix the problem faster.
- Low oil level: Not having enough oil can lower pressure. This affects the 42 psi needed for Variable Cam Timing (VCT) activation.
- Incorrect viscosity: The wrong oil thickness can harm lubrication. This hurts the pressure readings.
- Dirty or contaminated oil: Oil that’s old or dirty can cause bad pressure readings. Clean oil is essential for it to work right.
- Mechanical issues: Problems with the oil pump or engine bearings can change pressure levels. Bad components will show an error code.
- Faulty Engine Oil Pressure Sensor: A wrong sensor reading can mess up the oil pressure checks.
If the engine’s RPMs are 1100 or more and the oil temperature is under 100°C (212°F), the P1524 code might show up. Make sure your oil pressure stays over 4 psi at idle speed to avoid these issues.
P1524 Dodge Ram 1500 Troubleshooting Steps
To fix the P1524 Dodge Ram 1500 error code, you need to follow these steps carefully. This will help you find out exactly what’s causing the problem:
- Check Oil Level: Make sure the engine oil is at the right level and clean.
- Inspect Oil Filter: Look at the oil filter for any blockage or damage. You might need to change it. Consider alternatives like WIX 57060 and Donaldson P550794 filters.
- Test Oil Pressure: Use an oil pressure gauge to see if the pressure is above 41 PSI, as it should be.
- Examine Oil Pump: Check the oil pump for any damage that might be messing with the pressure. This could also affect how the camshaft works.
Using Dodge Ram 1500 diagnostic tools can make your troubleshooting more accurate. If you’re still having trouble, keep these additional steps in mind before fixing anything:
| Procedure | Details |
|---|---|
| Repair Procedure | Update the PCM with new software. |
| Labor Time | About 0.2 hours. |
| Special Tools | Use wiTECH or similar diagnostic tools. |
| Precautions | Keep voltage between 13.2 and 13.5 volts with a charger during the update. |
| Post-Repair | Reset the error codes with the wiTECH app after the update. |
| Note | Restart the update if it stops suddenly. |
| DTCs | You might see P1524 and P219A error codes. |
| Failure Code | Use code CC for warranty claims. |
| Verification | Check that everything is working right before you finish. |
By following these steps, you’ll do a great job at figuring out and fixing the P1524 Dodge Ram 1500 issue. This will help you repair it the right way.
How To Fix P1524 Dodge Ram 1500?
When fixing a P1524 Dodge Ram 1500, make sure your engine oil pressure is right. It must be around 42 psi for the Variable Cam Timing (VCT) system to work. And, it should stay above 31 psi for the VCT to keep working.
Here’s how to repair a P1524 Dodge Ram 1500 issue:
- Check Engine Oil Level: Ensure the engine oil level is good. Low oil can lower pressure and cause the P1524 code to appear.
- Refill Engine Oil: If needed, fill up the engine oil to the right level. Check the oil pressure after to make sure it’s stable.
- Replace Oil Filter: Use a quality filter, like the Wix 57060XP. A new filter can improve oil flow and remove air pockets.
- Install New Oil Pressure Sensor: A faulty sensor can give wrong readings. Replace it for correct oil pressure data.
- Inspect Oil System: Look for any mechanical issues, such as bad oil pumps or blocked paths. These can lead to low oil pressure and need fixing.
- Use a Mechanical Gauge: For accurate oil pressure readings, use a mechanical gauge. This is key if you’ve noticed low pressure before.
- Examine Wiring and Connectors: Check the wiring and connectors for damage. Bad connections can mess with voltage readings, setting off the P1524 code.
After making these fixes, you should see better oil pressure readings. Before, you might have seen 26 PSI at idle and 34 PSI when driving fast.
Ideally, after repairs, oil pressure should be 41 PSI at idle and 55 PSI on the road. This ensures the MDS system works well.
P1524 Dodge Ram 1500 Diagnosis Methods
When fixing the P1524 on a Dodge Ram 1500, start with a visual check. Look for any clear leaks near the oil filter and pan. Doing this can help find problems that aren’t seen in tests.
Then, test the oil pressure with a manual gauge. You need to check the oil pressure at different engine speeds. The pressure should stay over 14.0 psi to show everything’s working right.
Use an OBD-II scanner for oil pressure checks next. This helps see if there are any error codes about oil pressure or the valve timing system. Solve any voltage errors before going further.
- Make sure the engine oil isn’t low or dirty.
- Check that oil pressure is back to normal after fixing, 55 PSI on the road and 41 PSI at rest.
- Compare the EOP sensor reading on your scanner with actual pressure readings.
- Look over the PCM and related parts for any connection problems.
Remember, TSB #S2108000001 suggests updating the EPS software for the P1524 issue. Updating the EPS module might fix the problem causing this code.
P1524 Dodge Ram 1500 Repair Options
When you encounter the P1524 error code, you’ve got several good fixes to think about. Fixing this issue usually means doing some immediate repairs and thinking about long-term fixes.
You might need to replace key parts like the oil filter, pump, or pressure sensors to get the oil system working right. Cleaning your oil system is a big step in solving contamination problems.
Flushing out the system helps get rid of stuff that could mess with the oil pressure. This is really important if you find out the oil pressure is low, which is a common reason for the P1524 code.
Also, putting in better parts can make your Dodge Ram 1500’s oil system work smoother. High-quality parts from other brands are often more reliable and could stop future issues.
Talking to a skilled mechanic can give you a well-rounded strategy for dealing with the P1524 issues. A pro can do more than just swap parts. They can spot other problems that might be causing the error.
Making repair investments based on their advice can be really effective. Plus, regular check-ups help keep your vehicle in top shape and prevent the P1524 code from coming back.
Maintaining Correct Oil Pressure To Avoid P1524
Keeping the right oil pressure in your Dodge Ram 1500 is vital for its engine to run well and last long. To keep away from the P1524 error, focus on important maintenance steps.
Regular Oil Changes: Follow the schedule from the maker for oil and filter changes. This stops harmful buildup that can block oil flow.
Use Correct Oil Type: Make sure to use the oil grade and thickness Dodge recommends. The right oil makes sure your engine is well lubricated.
Monitor Engine Performance: Always watch your oil pressure. If it looks off, fix issues right away to prevent bigger problems.
Professional Maintenance: Get your car checked regularly by an expert mechanic. This can help spot oil pressure problems early on.
If oil pressure goes under 36 PSI, especially when idling, the engine may not perform well. This can mess with the Multi-Displacement System (MDS). Keep oil pressure over 41 PSI for the best performance.
If you’ve done all this and still have issues, check the oil pump and bearings. This makes sure everything is working as it should.
Conclusion
The P1524 error code is a big deal for your Dodge Ram 1500. It signals a potential problem with engine oil pressure. Knowing about this issue is key to keeping your truck reliable on the road.
Symptoms and common causes like low oil or bad sensors tell us we need to act fast to avoid more problems.
By following the tips given in this article, you can fix the P1524 error code on your Dodge Ram 1500. Keeping up with oil pressure checks stops this error from happening.
This not only prevents the code but also makes your truck last longer and run better. If ignored, the P1524 code could make your truck less efficient and reliable.
In short, knowing how to handle the P1524 error code means you can keep your Dodge Ram 1500 in top shape. Keeping up with regular maintenance and understanding how to troubleshoot are your best tools.
Doing these things means you can quickly fix the P1524 error, ensuring a great drive every time.
FAQs
What does the P1524 error code indicate in my Dodge Ram 1500?
The P1524 error code means your engine oil pressure is too low or too high. This problem affects the engine’s variable valve timing system.
What symptoms should I look for if I suspect a P1524 error code?
Look out for a lit check engine light and reduced engine power. You might also see bad fuel economy, unstable oil pressure, engine stalling, and less power when speeding up.
How can I troubleshoot the P1524 error code?
First, check the oil level and the condition of the oil filter. Next, use a gauge to test the oil pressure. Finally, check the oil pump for any mechanical issues.
What are the common causes of the P1524 code in my vehicle?
Low oil levels, dirty oil, bad oil filters, or issues with the oil pump or bearings can cause the P1524 code.
What solutions are available to fix the P1524 issue?
To fix the issue, you might need to refill the engine oil or get a new oil filter. Installing a new oil pressure sensor or fixing mechanical problems in the oil system also helps.
How do I diagnose the P1524 error code accurately?
For accurate diagnosis, check for oil leaks and test the oil pressure at different engine speeds. Also, use an OBD-II scanner to see if there are other error codes.
Can professional maintenance help prevent the P1524 error code?
Yes, getting regular checks and following oil change schedules can ward off oil pressure problems and the P1524 error.
